mxiang.camera.mod13 (AW300): cs2 tcp i/o timeout - camera connects but sends no data

[vittcopp92]

Camera: Xiaomi Outdoor Camera AW300
Model: mxiang.camera.mod13
go2rtc version: 1.9.14+dev.dc1685e platform=linux/arm
Tested on: Raspberry Pi same subnet (192.168.1.x) - no Docker, no NAT
Error: xiaomi: probe: miss: read media: cs2: read tcp 192.168.1.42:56402->192.168.1.15:28276: i/o timeout

The camera connects (no 401, no permit deny) but sends no data via TCP.
Protocol from probe: cs2+udp
Another user (kymap010) confirmed AW300 works - but no details on setup.

[NEVARLeVrai]

13:37:45.441 DBG [webrtc] add consumer error="streams: read udp [::]:53914: i/o timeout"

getting this for me on windows

[vittcopp92]

with version 1.9.13 it connects but freezes after a few seconds

[thedarkmen4you]

Hi,
A had the same problem and my solution was:

1. check firewall, in my case I use ufw and i had to allow it: sudo ufw allow from 192.168.1.XXX to any proto udp
2. i added to my steam this: &subtype=1
   ex:
   streams:
   aw300: 'xiaomi://{ACCOUNT}:{REGION}@{IP}?did={DEVICE_ID}&model=mxiang.camera.mod13&subtype=1'

I hope it helps you too

[NEVARLeVrai]

Hi,
A had the same problem and my solution was:

1. check firewall, in my case I use ufw and i had to allow it: sudo ufw allow from 192.168.1.XXX to any proto udp
2. i added to my steam this: &subtype=1
   ex:
   streams:
   aw300: 'xiaomi://{ACCOUNT}:{REGION}@{IP}?did={DEVICE_ID}&model=mxiang.camera.mod13&subtype=1'

I hope it helps you too

Im not in the same network as my cam, maybe i was wrong but the software doesn't work with the Xiaomi cloud streaming feature ?

[thedarkmen4you]

I think you need to be in the same network, the Xiaomi cloud is used just to get your url and token so you can auth on the camera

[NEVARLeVrai]

I think you need to be in the same network, the Xiaomi cloud is used just to get your url and token so you can auth on the camera

okay, though we was able to cloud stream, then seems not