This example: https://github.com/esp-rs/std-training/blob/main/advanced/button-interrupt/examples/solution.rs
Copy pased to setup generated from std template on "ESP_IDF_VERSION = "v5.1.3"" uploaded to ESP32C3 M5 stamp. Same effect on Wokwi ESP32C3 std blink example.
In both cases I got spammed with button clicked. It looks like instead "on_edge" interrupt I got "on_level".
Also initial debug log is not changing at all. Only indicates used GPIOs with all params set to 0:
I (18) gpio: GPIO[9]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
No change after setting input pulls, attaching interrupt or using as output.
dependencies:
esp-idf-svc = { version = "0.48", default-features = false }
anyhow = "1.0.81"
This example: https://github.com/esp-rs/std-training/blob/main/advanced/button-interrupt/examples/solution.rs
Copy pased to setup generated from std template on "ESP_IDF_VERSION = "v5.1.3"" uploaded to ESP32C3 M5 stamp. Same effect on Wokwi ESP32C3 std blink example.
In both cases I got spammed with button clicked. It looks like instead "on_edge" interrupt I got "on_level".
Also initial debug log is not changing at all. Only indicates used GPIOs with all params set to 0:
I (18) gpio: GPIO[9]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
No change after setting input pulls, attaching interrupt or using as output.
dependencies:
esp-idf-svc = { version = "0.48", default-features = false }
anyhow = "1.0.81"