Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT (Internet of Things) devices. It was designed as a mini Cat that integrates the powerful ESP32-C6, GPS, microSD card slot, and OLED display. This board is a mini Swiss army knife for IoT security researchers, developers, and enthusiasts.
Minino can operate across multiple wireless technologies and RF tools:
- BLE (Trackers scanner for AirTag, SmartTag, Tile, Chipolo & BLE Spam / HID)
- Wi-Fi (Sniffer, Deauthenticator, CatDoS, SSID Spam, Captive Portal, DroneID)
- RF Spectrum Analyzer (2.4 GHz Wi-Fi & Zigbee real-time analyzer, Fox Hunting, Peak Tracker, Jammer & DroneID IDS, PCAP capture)
- Software Defined Radio (SDR) (Native 80 MS/s I/Q transceiver, CW/Packet TX, On-Chip FFT, and ESPARGOS WebSDR Host)
- Surveillance Detection (Flock Safety ALPR, Body Cams, Skimmers)
- Zigbee (IEEE 802.15.4 Sniffer over CLI and Spoofing)
- Thread & Matter (IEEE 802.15.4 / 6LoWPAN Sniffer and Broadcast)
- GPS (Wardriving & Geotagged Evidence Logging)
- Compatible with CatSniffer's PyCatSniffer
- Compatible with Wireshark (Live serial streaming &
.pcaplogging on microSD) - Compatible with ESPARGOS WebSDR (Browser-based real-time waterfall, FFT spectrum, and I/Q capture over WebSerial)
- Real-time 2.4 GHz RF Spectrum Analyzer with Fox Hunting, 2X Peak Tracker, EMA filtering, and Smart Anti-Jammer detection
- Selectable OLED Menu Styles (
Classic,Icon List,Grid,Hero + Dock) - WarDriving (WiFi, Zigbee, Thread, BLE, Surveillance)
- Multiprotocol packet sniffing
- Supports
.pcapand.iqfile storage on microSD - File Manager Web & Local OLED Browser
- Unified firmware image generation (
minino-merged.binandminino-merged.hex) - OpenSource & Open Hardware
- OTA Updates
[] Features coming soon [x] Working features
Important
OTA requires 8MB. If you want to build for other memory capacities, compile without OTA.
- Wardriving: Geotagged WiFi AP discovery with GPS coordinates.
- WiFi Sniffer / Analyzer: Real-time 2.4 GHz channel traffic monitoring and AP summary.
- WiFi Deauther: Injects 802.11 deauthentication frames to disconnect target devices.
- Deauth Scan (Detector): Continuously monitors the airwaves for active deauth attacks.
- DOS Attack (CatDoS): Wireless Denial of Service and beacon flooding.
- SSID Spammer: Broadcasts thousands of fake WiFi Access Points simultaneously.
- Captive Portal: Rogue AP with captive portal web server for testing.
- DroneID Scanner: Listens for and decodes ASTM F3411 Remote ID drone telemetry and GPS location.
- DroneID Transmitter: Broadcasts simulated Drone Remote ID beacons.
- Modbus TCP: Industrial IoT and SCADA Modbus TCP endpoint scanner.
- Flock / ALPR Detector: Detects Flock Safety ALPR cameras, body cams, and skimmers.
- Flock Simulator: Transmits test surveillance telemetry beacons for detection auditing.
- Wireshark integration
- BLE Spammer: Floods advertisement popups targeting iOS (Apple), Android, Windows, and Samsung devices.
- BLE HID Spoofing: Emulates Bluetooth Human Interface Devices (keyboard, mouse, media remote).
- BLE ADV Sniffer: Raw advertisement packet sniffer with Wireshark serial streaming.
- BLE Trackers Scanner: Detects and tracks Apple AirTags, Samsung SmartTags, Tile, and Chipolo with RSSI signal and distance estimation.
- Wireshark integration: Real-time BLE packet capture over serial.
- Zigbee Sniffer: IEEE 802.15.4 over-the-air packet sniffer.
- Zigbee Spoofing: End Device emulation (smart light bulbs and switches).
- Wardriving: Geotagged Zigbee network reconnaissance.
- Wireshark integration: Zigbee frame capture streaming to Wireshark.
- Thread Sniffer: IEEE 802.15.4 / 6LoWPAN Thread network packet sniffer.
- Thread Broadcast: Injects multicast and broadcast packets into Thread networks.
- Wardriving
- Wireshark integration
- Matter protocol support
- Matter CLI
- Matter Spoof
- Wardriving: Geotagged reconnaissance (WiFi, Zigbee, Thread) logged to SD card.
- Location: Displays real-time latitude, longitude, and altitude coordinates.
- Speed: Displays GPS ground speed (km/h) and heading direction.
- Date & Time: Atomic clock synchronization and RTC update.
- Route: Route and waypoint recording to SD card (.gpx / .csv).
- Num Sats: Displays active satellite constellation and SNR signal quality.
- GPS Sleep
- I2C Scanner: Scans external I2C bus (SDA/SCL) device addresses.
- UART Bridge: Hardware serial bridge / pass-through console on UART2.
- File Manager Local: On-device microSD file browser using OLED screen and buttons.
- File Manager Web: Embedded HTTP web server for WiFi-based file downloads and uploads.
- 14-Channel Bars (
BARS): Real-time 2.4 GHz bar chart overview with Peak Hold markers across all channels. - Live Channel Scope (
SCOPE): Single-channel rolling time-domain power curve and RSSI telemetry. - 2D Waterfall (
WATER): Rolling spectrogram for visualizing transient transmissions and duty cycles. - Fox Hunting Meter (
FOX): High-contrast direction-finding proximity gauge (0-100%), calibrated dBm scale (-90to-30 dBm), Peak Hold line, and Squelch threshold marker. - 2X Peak Tracker (
PEAK): Big-font display highlighting the strongest active signal (dBm), channel number, and center frequency (MHz) for rapid field readings. - Dual-Band & Tri-Channel Sweep: Supports both Wi-Fi (
Ch 1-14,2412-2484 MHz) and IEEE 802.15.4 / Zigbee (Ch 11-26,2405-2480 MHz), plus rapid Tri-Channel Sweep (Ch 1, 6, 11). - Smart Anti-Jammer & RF IDS: Multi-factor evaluator (
rf_jammer_evaluate) and EMA filter (rf_filter_ema_rssi) that distinguish Layer-1 RF noise/CW jammers and Layer-2 Deauth floods (0xC0/0xA0) from normal high-throughput AP traffic and adjacent-channel spillover. - Passive DroneID Detection: Inspects ASTM F3411 (
OUI FA:0B:BC), French Direct Remote ID (OUI 6A:5C:35), and Wi-Fi Aware NAN (88:69:19:9D:92:09) frames to alert and log active drone UAS IDs per channel. - Direct PCAP & CSV Logging: Streams raw 802.11 frames to microSD (
/sdcard/spectrum_XX.pcap) and signal telemetry to CSV without dropping the spectrum view.
- RX I/Q Burst Capture (
[IDL]/[RX]): Native in-process 80 MS/s hardware DMA/dump capture into reserved SRAM (0x40840000), live physical RSSI calculation (dBm), and automatic.iqfile saving to microSD (/sdcard/sdrcapXX.iq). - 802.11 Raw Packet TX (
[TX:PKT]): Injects bursts of custom 802.11 raw Probe Request frames (MININO-SDR-TX) on the selected channel (2412-2484 MHz,Ch 1-14). - PHY Continuous Wave Carrier (
[TX:CW]): Emits an unmodulated RF test carrier on the tuned frequency via the ESP32-C6 PHY synthesizer with a 30-second hardware safety timeout. - ESPARGOS WebSDR Host (
[HOST]): Streams real-time I/Q bursts (CAP16/CAP20at80,40, or16 MS/swith software decimation and LNA gain control0-60 dB) and on-chip radix-2 FFT spectrum frames (SPEC/SPC1) over USB directly to the ESPARGOS WebSDR App (https://espargos.net/espsdr/app/).
- Display: Configures OLED screensaver style and timeout.
- Menu Style: Selectable OLED menu rendering views persisted in NVS (Classic, Icon List, Grid, and Hero + Dock).
- Logs Output: Configures serial and on-screen log levels.
- SD Card Settings: Displays SD capacity, checks format integrity, and provides FAT32 formatting.
- WiFi Settings: Manages WiFi station credentials and radio settings.
- Stealth Mode: Disables all LEDs, buzzer sounds, and screen animations for silent operation.
- Light Sleep Mode: Low-power sleep mode for battery saving.
- Deep Sleep Mode
- Version & License: Displays firmware version, build date, and licensing details.
- Credits & Legal: Contributor credits and responsible disclosure notice.
- OTA Firmware Update: Over-The-Air firmware updates via WiFi.
Minino integrates a native, in-process Software Defined Radio (SDR) engine (firmware/main/modules/esp_sdr/) running directly inside Minino OS without requiring dual-boot or a secondary ota_1 partition. It drives the ESP32-C6 hardware I/Q dump engine at 80 MS/s, reserves the 128 KiB SRAM Block 2 (0x40840000 - 0x40860000) at link time (esp_sdr_bank.ld), and locks the USB-Serial-JTAG reset register (usb_uart_chip_rst_dis = 1) while active so browser WebSerial DTR/RTS transitions never reboot the board.
Because the hardware I/Q capture bank requires 128 KiB of contiguous SRAM below 0x40840000, the SDR variant compiles without the Zigbee and OpenThread stacks to fit within the 256 KiB lower-SRAM budget (profiles/sdr/profile). Every build automatically generates both individual partition binaries and unified single-file images (minino-merged.bin and minino-merged.hex):
cd firmware
make build-sdr # Builds the SDR-enabled firmware in build-sdr/
idf.py -B build-sdr -p /dev/ttyACM0 flash # Flashes bootloader, partition table, and appOr flash the single unified binary at address 0x0:
esptool.py --chip esp32c6 -p /dev/ttyACM0 write_flash 0x0 build-sdr/minino-merged.binInside Applications > SDR (or by running sdr_capture in the serial console), press BOOT or hold RIGHT to cycle through the four operating modes:
| Mode Header | Function | Controls |
|---|---|---|
MININO SDR [IDL] / [RX] |
RX I/Q Burst Capture: Captures 8,192 32-bit I/Q words (10-bit signed I in bits 9:0, 10-bit signed Q in bits 19:10) at 80 MS/s, computes physical RSSI (dBm), and saves /sdcard/sdrcapXX.iq. |
UP/DOWN: Tune 2412-2484 MHz (Ch 1-14)RIGHT: Capture & SaveBOOT / Hold RIGHT: Next modeLEFT: Exit |
MININO SDR [TX:PKT] |
802.11 Raw Packet Injection: Transmits 5-packet bursts of raw 802.11 Probe Request frames (SSID: MININO-SDR-TX) on the active channel. |
UP/DOWN: Tune channelRIGHT: Send packet burstBOOT / Hold RIGHT: Next mode |
MININO SDR [TX:CW] |
PHY Continuous Wave Tone: Emits an unmodulated RF carrier via the ESP32-C6 PHY synthesizer (c6_sdr_tx_carrier_start) with an automatic 30-second safety timeout. |
UP/DOWN: Tune channelRIGHT: Toggle CW ON/OFFBOOT / Hold RIGHT: Next mode |
MININO SDR [HOST] |
ESPARGOS WebSDR Host: Serves the ESP-SDR line/binary protocol over USB for real-time waterfall, FFT, and I/Q streaming in the browser. | BOOT: Exit Host mode to RXLEFT: Stop Host & Exit app |
Minino is fully compatible with the official ESPARGOS WebSDR application (https://espargos.net/espsdr/app/), providing a real-time waterfall, spectrum analyzer, constellation viewer, and I/Q burst streamer in any Chromium-based browser (Chrome, Edge, Brave) via WebSerial:
- Connect Minino via USB and open
Applications > SDRon the device. - Open https://espargos.net/espsdr/app/ in your browser and click Connect to select the Minino USB serial port (
/dev/ttyACM0orCOMx). - Automatic & Manual Activation:
- Auto-Switch from SDR App: If you are anywhere inside
Applications > SDR, as soon as the ESPARGOS web app sends its initialSYNChandshake, Minino automatically switches into[HOST]mode, suspends the interactive serial console, and begins streaming. - Manual Toggle on OLED: Press
BOOT(or holdRIGHT) inside the SDR app until the screen displaysMININO SDR [HOST](Web: espargos.net/App: /espsdr/app), then click Connect on the web page. - From Serial Console: Type
sdr_hostin the Minino console (115200baud) to hand over the USB port directly.
- Auto-Switch from SDR App: If you are anywhere inside
- Supported ESPARGOS WebSDR Capabilities:
- On-Chip Spectrum (
SPEC/SPC1): High-FPS radix-2 Q15 FFT computed directly on the ESP32-C6 (256,512,1024, or2048bins) with DC offset modes (DC 0/DC 1) and zlib CRC32 verification. - Raw I/Q Burst Streaming (
CAP16/CAP20): 8-bit (CAP16) and 10-bit packed (CAP20) I/Q transfers with hardware-chunked 64-byte USB FIFO writes. - Live Parameter Negotiation: Supports on-the-fly center frequency tuning (
FREQ 2412..2484), sample rate decimation (80 MS/s,40 MS/s,16 MS/s), and RX LNA gain control (GAIN 0..60 dB).
- On-Chip Spectrum (
- Exiting Host Mode: Disconnect from the browser (sends
RELEASE), pressLEFTorBOOTon Minino, or sendMININO\nover serial. (Note: Do not click "Flash Firmware..." on the ESPARGOS page, as that overwrites Minino OS with upstream esp-sdr).
The RF Spectrum Analyzer (Applications > Spectrum, implemented in firmware/main/apps/rf_spectrum/) operates directly on the ESP32-C6 physical (PHY) and MAC layers to provide real-time 2.4 GHz situational awareness and transmitter hunting:
- 5 Interactive OLED Views (cycle with
RIGHT):BARS: 14-channel bar chart with Peak Hold indicators.SCOPE: Single-channel real-time RSSI oscilloscope trace.WATER: 2D rolling waterfall spectrogram.FOX(Fox Hunting): High-contrast direction-finding proximity meter (0-100%) with calibrated dBm ticks (-90to-30 dBm), Peak Hold line (|), Squelch marker (:), and Geiger counter audio clicks (HOLD UP).PEAK(2X Peak Tracker): Large 2X-scaled readout of the strongest detected signal (dBm), channel, and frequency (MHz).
- Signal Processing & Smart Anti-Jammer:
- EMA Smoothing: Applies an Exponential Moving Average filter (
rf_filter_ema_rssi) to stabilize noisy RSSI readings while preserving rapid peak attack. - Intelligent Jammer Evaluator (
rf_jammer_evaluate): Cross-checks RSSI saturation (>= -45 dBm), valid 802.11 frame counts, beacon presence, FCS CRC error ratios, Deauth/Disassoc counts (0xC0/0xA0), and adjacent-channel AP spillover (+-1channel at>= -38 dBm) to eliminate false positives from nearby routers.
- EMA Smoothing: Applies an Exponential Moving Average filter (
- Passive DroneID & PCAP Forensics:
- Automatically decodes ASTM F3411 / ASD-STAN (
FA:0B:BC), French Direct Remote ID (6A:5C:35), and Wi-Fi Aware NAN (88:69:19:9D:92:09) beacons, displaying! DRONE CH X !and logging the drone's serialUAS ID. - Hold
DOWN(or runspectrum_pcap on) to stream raw 802.11 frames into sequential/sdcard/spectrum_00.pcapfiles compatible with Wireshark.
- Automatically decodes ASTM F3411 / ASD-STAN (
- Serial Console Commands: Control and inspect live state via
spectrum_pcap [on|off|toggle],spectrum_drone [clear],spectrum_ids [clear],threshold [<dBm>|off],spectrum_audio [on|off|toggle],spectrum_band [wifi|zigbee], andexit_app.
Minino OS uses a deterministic resource management and lifecycle architecture across all wireless modules:
radio_lease(components/radio_lease/): Reference-counted hardware arbiter that manages mutually exclusive Wi-Fi/802.15.4 and BLE radio claims plus shared promiscuous RX leases (RADIO_PROM_SDR_RX,RADIO_PROM_SPECTRUM,RADIO_PROM_SURV,RADIO_PROM_ANALYZER).wifi_service(components/wifi_service/): Centralizesesp_wifi_init()and netif creation so switching between AP, STA, Sniffer, Spammer, and SDR modes never triggers duplicate netif assertions or memory leaks.gap_dispatcher&gatt_dispatcher(components/gap_dispatcher/): Multiplexes Bluedroid GAP and GATTC callbacks to multiple concurrent subscribers without callback rotation conflicts.app_manager& Selectable OLED Menu Styles (main/modules/menus_module/): Cleanminino_app_t(on_enter,on_input,on_exit) lifecycle with a dedicated FreeRTOS button input queue and four NVS-persisted UI styles (Classic,Icon List,Grid,Hero + Dock).- Host Unit Test Suite: Over 20 host-side Unity and Python test suites (
make -C firmware tests) validating protocol parsers, FFT math, channel clamping, radio leases, and NMEA/PCAP formatting on standardgccwithout hardware.
Minino includes a dedicated scanner and tracker for Bluetooth Low Energy beacon devices:
- Supported Ecosystems: Apple Find My / AirTags, Samsung Galaxy SmartTag / SmartTag2, Tile (Mate, Pro, Slim), and Chipolo.
- Proximity & Signal Monitoring: Real-time RSSI signal tracking, proximity approximation, and packet reception rates.
- Detailed Inspection: Live viewing of device MAC address, manufacturer payload, registered status, and last-seen timestamps.
- Paging & Filtering: Navigate easily across multiple active trackers in range.
Minino features an advanced passive detection engine designed to detect physical surveillance infrastructure in real time:
- Flock Safety / ALPR Detection: Detects Automated License Plate Readers (ALPR) such as Flock Safety cameras, Falcon systems, and Raven audio detection units.
- Multi-Vector Fingerprinting:
- WiFi: Matches known OUI vendor prefixes (35+ Flock OUIs, DeFlock database), surveillance SSIDs (
flocksafety,pigvision,fs ext,penguin, etc.), and 802.11 Information Element (IE) signatures. - BLE: Identifies characteristic advertising beacons and vendor payloads (e.g. Xuntong BLE modules, Flock battery diagnostics).
- WiFi: Matches known OUI vendor prefixes (35+ Flock OUIs, DeFlock database), surveillance SSIDs (
- Body Cameras & Skimmers: Identifies Axon Body Worn Cameras and common Bluetooth-based payment skimmers.
- Evidence Capture & GPS: Automatically stores detected devices with GPS coordinates (
.csv/.gpx) and captures raw network traffic (.pcap) on the microSD card.
Inspired by projects such as Amini Project and USBNugget.
Check the Developer guide to learn how to build the firmware from scratch.
Contributions are welcome!
Please read the document Contribution manual which will show you how to contribute your changes to the project.
✨ Thanks to all our Contributors! ✨
See Electronic Cats CLA for more information.
See the Community code of conduct for a vision of the community we want to build and what we expect from it.
Electronic Cats invests time and resources providing this open source design, please support Electronic Cats and open-source hardware by purchasing products from Electronic Cats!
Designed by Electronic Cats.
Firmware released under a GNU AGPL v3.0 license. See the LICENSE file for more information.
Hardware released under a CERN Open Hardware Licence v1.2. See the LICENSE_HARDWARE file for more information.
Electronic Cats is a registered trademark, please do not use if you sell these PCBs.
Nov 29 2022